Steel

Our gear drives are built to run in the toughest steel mill applications.

5
Products
30+
Applications

What separates us from the competition?

2 Year
Warranty
500 %
Shock load capacity with Cyclo units
24/7 Service
Available after hours

Steel Industry

Steel mills demand maximum performance of their equipment, able to withstand 24 hours a day and 7 days a week operations, with high efficiency and low maintenance. We understand that the high shock loads, dust, heat, and moisture in the corrosive environments of the steel industry require robust, reliable, and efficient products. Equipment failure in rolling mills can destroy materials and incur significant cost to the organization.   For these reasons, Sumitomo is the trusted solution in power transmission products.

Sumitomo Drive Technologies’ products are extremely reliable, guaranteed by a two year warranty, and have an exceptionally long service life.

Related Products

Optidrive E3 AC Variable Frequency Drive
Power range
1.00 HP - 224.00 HP
Learn more
Optidrive P2 Variable Frequency Drive
Power range
0.75 kW - 250.00 kW
1.00 HP - 350.00 HP
Learn more
PARAMAX® SCC Series Reducer for Cranes
Torque range
8500.00 Nm - 101000.00 Nm
75231.00 in-lbs - 893925.00 in-lbs
Ratio range
22.40:1 - 90.00:1
Shaft configuration
Parallel
Learn more
Inverter HF-430α Series

High-Performance Sensorless Vector Inverter with Built-In Noise Filter / Compliant with d2G4

Power range
5.50 kW - 55.00 kW
7.50 HP - 75.00 HP
Learn more
HEDCON® Worm Gear Reducer
Torque range
790.00 Nm - 82100.00 Nm
6992.00 in-lbs - 726646.00 in-lbs
Ratio range
5.00:1 - 100.00:1
Shaft configuration
Right Angle
Learn more
Cyclo® Reducer
Torque range
24.00 Nm - 68200.00 Nm
212.00 in-lbs - 603620.00 in-lbs
Ratio range
2.50:1 - 658503.00:1
Shaft configuration
Concentric
Configure this productLearn more
Cyclo® 6000 Gearmotor
Power range
0.10 kW - 132.00 kW
0.13 HP - 175.00 HP
Ratio range
2.50:1 - 658503.00:1
Shaft configuration
Concentric
Configure this productLearn more
PARAMAX® 9000 Series Reducer

* Rated Torque

Torque range
2600.00 Nm - 552000.00 Nm
23012.00 in-lbs - 4885610.00 in-lbs
Ratio range
6.30:1 - 500.00:1
Shaft configuration
Parallel, Right Angle
Learn more
COMPOWER® Planetary Gear Reducer
Torque range
460.00 Nm - 736000.00 Nm
4071.00 in-lbs - 6514140.00 in-lbs
Ratio range
5.00:1 - 1400.00:1
Shaft configuration
Concentric
Learn more
COMPOWER® Planetary Gearmotor
Power range
0.20 kW - 55.00 kW
0.25 HP - 75.00 HP
Ratio range
5.00:1 - 1400.00:1
Shaft configuration
Concentric
Learn more
Bevel Buddybox® Reducer H-Series
Power range
2.20 kW - 11.00 kW
3.00 HP - 15.00 HP
Ratio range
5.00:1 - 20.00:1
Shaft configuration
Right Angle
Learn more
Content Banner Special PX
Special Paramax: Drop-In Reducers
Torque range
2600.00 Nm - 740000.00 Nm
22996.00 in-lbs - 6550000.00 in-lbs
Ratio range
1.25:1 - 630.00:1
Learn more

"Our applications are so demanding that we'’ve broken shafts, we’'ve broken pillow blocks, but we’ve never broken a Cyclo® reducer. In one case, the gears of one of the previous drives flew right out of the casing when shock pounded the worm right through it. Now, anytime a drive in the plant failed, whenever possible, we replaced it with a Cyclo®. Cyclos tolerate harsh operating conditions like rapid reversal, shock loads, water, dirt and heat better than any other gearbox."

Steel Mill
Whitby, Ontario