Fine Cyclo A-Series F2 Type
Compact all-rounder high precision gearbox
All-rounder for all available automation tasks. Compact cylindrical housing.
- Less than 1 arcmin Lost Motion
- Fully sealed and ready to use
- Maintenance free for life
- 5 different ratios available (depending on size)
- Many different input shaft styles and types possible
- Motor adapter on request
Variants:
- F2C-A cylindrical housing
- F2CF-A flange housing
Input Shaft Variants:
- Keyway
- Clamp Ring
- Spline
| Zero Mechanical Backlash | |
| Lost Motion | <1 arcmin |
| Number of Sizes | 4 |
| Reduction Ratios | 29:1 / 59:1 / 89:1 / 119:1 / 179:1 (availability depending on size) |
| Nominal Torque | 149 Nm up to 1390 Nm |
| Acceleration Torque | 335 Nm up to 2910 Nm |
| Max. Momentary Peak Torque | 785 Nm up to 7210 Nm |
| Input speed | up to 6150 rpm |
| Max. Bending Moment | 608 Nm up to 2550 Nm |
| Bending Stiffness | 230 Nm up to 1600 Nm |
| Axial Load | 3920N up to 11800N |
| Torsional stiffness | up to 445 Nm/arcmin |
Key Product Facts
2910
Nm
Acceleration Torque
179:1
ratio
in a single stage
126
mm
Smallest outer diameter
Advantages of Fine Cyclo A-Series
Compact Design
High Torsional Stiffness
up to 445 Nm/arcmin
High Overload Capacity
Momentary Peak Torque up to 7210 Nm
High Efficiency
Fully sealed, ready to use
Maintenance free for life
Lifetime Lubricated For Any Position
Main dimensions and mass
| Size | Length L [mm] | Diameter G [mm] | Diameter D [mm] | Diameter d1 (1) [mm] | Mass [kg] |
|---|---|---|---|---|---|
| A15 | 65.5 | 126 | 90 | 14 | 5 |
| A25 | 70 | 156 | 114 | 22 | 7.3 |
| A35 | 85 | 186 | 140 | 30 | 13 |
| A45 | 101 | 231 | 174 | 38 | 24 |
Diameter G = Casing diameter
Diameter D = Output major diameter
Diameter d1 = Input shaft diameter
(1) maximum values, adjusted to customer motor
Torque and Speed main data
| Size | Nominal output torque (1) [Nm] | Accel. / decel. torque [Nm] | Mean input speed (2) [rpm] | Max input speed [rpm] | |
|---|---|---|---|---|---|
| A15 | (i 59, 89) | 149 | 335 | 5600 | 6150 |
| A25 | (i 29) | 283 | 721 | 3100 | 4350 |
| (i 59...119) | 349 | 4200 | 5050 | ||
| A35 | (i 29) | 499 | 1390 | 2500 | 3500 |
| (i 59...119) | 668 | 3300 | 3950 | ||
| A45 | (i 29) | 1060 | 2910 | 1900 | 2700 |
| (i 59...179) | 1390 | 2600 | 3150 | ||
(1) at input speed n1=1500 rpm
(2) at 50% ED
Output bearing capacity
| Size | Max permissible bending moment [Nm] | Max permissible axial load push / pull [N] |
|---|---|---|
| A15 | 608 | 3920 / 2450 |
| A25 | 1030 | 3920 / 2450 |
| A35 | 1620 | 7850 / 5400 |
| A45 | 2550 | 11800 / 6870 |
Available ratios
| Size | Ratios |
|---|---|
| A15 | 59 / 89 |
| A25 | 29 / 59 / 89 / 119 |
| A35 | 29 / 59 / 89 / 119 |
| A45 | 29 / 59 / 89 / 119 / 179 |
Above technical specifications are intended for rough preselection only.
